Freedom Technologies

  Home    Rackmount Servers    2-Socket 2U Enterprise Back-End High Redundancy

ProServ 2680 by Freedom Technologies 2U Rackmount Server High Availability and Redundancy

Top of the line 2U Server features hot-pluggable redundant power and redundant cooling

Freedom Technologies 2U Rack Server iNET 2680

iNET 2680 is built with Intel Xeon Dual and Quad-Core 64-bit ProcessorsFreedom TechnologiesProServ by Freedom Technologies2680 is a 2U Rackmount Server that is used for essential applications where uptime and performance is of prime importance.

This server offers very high available features such as, redundant hot-swappable cooling fans and hot-pluggable power supplies. The ProServ 2680 also can be configured with memory mirroring and sparing.

There is a direct connection between the hard drives and Server Board removing the need for hard drive cables. You can configure this 2U Server with Serial ATA and/or Serial Attached SCSI to best suit your requirements. We recommend the 18E PCI-E x8 RAID Controller with its own memory and 72-hour backup battery module for superior RAID

Freedom Technologies 2680 2U Rackmount Server is an excellent candidate as a Contact Management Server , Database Server , Network Security and Intrusion Detection Server , Web Server Intranet Server , Internet Server , Mail Server and Application Server for ASP's.

The Server Management built into the Server Board (Baseboard Management Controller) provides you with instant remote hardware status, power cycling and, hardware logs. The included Server Management Software included must be installed on the Server that has either Red Hat, SuSE Linux or Microsoft Windows installed.

Other Open Source OS's such as FreeBSD 6.x (i386 or AMD/64), CentOS, Fedora Core, Gentoo and other Linux Distributions can take advantage of freely available ipmitool or freeipmi.

Ultimately, you have full out-of-band Server Management control regardless of where you or the Server is located and whether the Server is powered on or powered off via the Internet.

Freedom Technologies ProServ 2680, provides the foundation for high-performance computing in a Rack Mount 2U form factor with advanced features and a high return on investment.

Customize and Buy FreeBSD Systems iNET1864 1U Rack Server

Not sure if this server is right for you? Please feel free to call us toll-free. We're here to answer your questions.

Specifications

  • ProServ 2680 Premium 2U Rack-Optimized Chassis with support for up to six Hot-Pluggable SAS and/or SATA-II (3GB/sec) Hard Drives, High-Performance Active SAF-TE SAS/SATA-II Backplane and RAID enabled Mid-Plane
    Chassis Dimensions: Height 3.45in Width 16.93in Depth 26.46in
    Height 87.30mm Width 430mm Depth 838.2mm
  • Server Board Chipset: Intel X5000 Chipset featuring Intel 64-Bit Memory Technology; Supports both 32-bit and 64-bit Operating Systems such as FreeBSD and Linux Fedora Core, Red Hat Enterprise Server, SuSE and, Microsoft 2003 and 2008 Server.
  • Processor Support: One or two Intel Dual-Core and Quad-Core Xeon 64-bit Processors with up to 1333Mhz Front Side Bus, Hyper threading technology and EM64T, with up to 8MB of cache.
  • Disk Controller: ROMB supports cableless RAID-0 RAID-1 and RAID-10. Optional Intel 18E PCI-Express x8, with separate memory and 72-hour backup battery cache supports RAID 0/1/10/5/50.
  • PCI Expansion: Two Full-Height PCI-Express (x8) and One Full-Height PCI-X 64Bit/100MHz and three Low-Profile PCIe (x8)
  • Network: Dual Intel PRO/1000MT Server Ethernet controllers
  • Front Panel: 1 x USB-2.0 Port and Video Port
  • Rear Panel: 2 x USB-2.0 Ports, Two Serial Ports; 1 x DB9 and 1 x RJ45 to DB9
  • Memory: Eight DIMM slots provide up to 32GB DDR2/667MHz Advanced E.C.C. Fully Buffered, CMTL Certified Memory. Configurable memory mirroring and sparing.
  • Cooling System: Six hot-pluggable fans. 6 x 80mm fans.
  • Headless Lights Out: Bios and Serial Console Redirection support, PXE boot option, IPMI compliant Server Chassis and Server Board and Server Management Software included
  • Power: 1+0 Hot-Pluggable 750-Watt P.F.C.120-240Volt auto-sensing Power Supply with option for Hot-Pluggable Redundant 750-Watt 1+1 Power Supplies
  • Remote Server Hardware Management: IPMI-2 Compliant. Integrated Base Board Management Controller monitors critical sensors in the Server. Monitoring Software included for Linux and Windows on CDROM. Optional Advanced Remote Management daughter card with 10/100 dedicated NIC provides KVM, http and telnet access to the controller and provides email notification for customizable critical hardware events.
  • Graphics: Integrated ATI ES1000 video controller with 16MB DDR SDRAM
  • Warranty: 3 Year Warranty - Flexible On-Site Hardware Maintenance options available

1U Servers | 2U Servers | NEBS-3 Servers | RAID Subsystems | Contact Us | Privacy | Site Map | Click to verify BBB accreditation and to see a BBB report.

Search

Freedom Technologies - Dependable Servers, RAID Systems and E-Business Solutions.
Toll Free: 1.877.963.1900